Loading arms are increasingly being purchased for special applications that require accurate and thorough specification and considerable engineering assessment. The uniqueness of each loading arm application is reflected in the variability and complexity of operating envelopes, products transferred, simultaneous service requirements, manifold spacing, jetty and piping layouts, arm styles, environmental loadings, auxiliary hardware etc. All these variables need to be considered during the design basis stage and be accurately presented in the final loading arm specification. This book, which draws on the OIMF member's experiences, will provide support to the terminal as it considers all of these variables.
Author: OCIMF.
Published: 1999 (3rd Edition)
No Pages: 63
ISBN: 9781856090711
Part 1 Specification
1 Design and Construction Standards and Practices
2 Design Details and Requirements
3 Materials
4 Design
4.1 General
4.2 Stress Analysis
5 Swivels and Structural Bearings
6 Quick-Connect/Disconnect Couplers (QC/DC)
7 Emergency Release Systems (ERS)
7.1 General Requirements
7.2 General Liquid Services
7.3 Liquefied Gas
8 Accessories
8.1 Storm Locks
8.2 Jacks
8.3 Stray Current Protectors
8.4 Valves, Flanges and Connections
8.5 Fixings
8.6 Lubrication
9 Hydraulic Power Systems
10 Controls
10.1 General
10.2 Range Alarms and Shutdown Systems
10.3 Emergency Release Systems (ERS)
11 Electrical Components
11.1 General
11.2 Electrical
12 Testing
12.1 General
12.2 Normal Temperature Services
12.3 Low Temperature Service
12.4 Operational Tests
12.5 Swivel Tests
12.6 Emergency Release System (ERS) Tests
12.7 Quick Connect/Disconnect Coupler (QC/DC) Tests
13 Quality Assurance and Quality Control
13.1 Quality System
13.2 Quality Plan
14 Recommended Documentation
14.1 Tender Documentation
14.2 Contract Documentation
Part II-Tables and Figures
Tables
Table 1 Arm Design Details
Table 2 Product and Operation Data
Table 3 Ship Details
Table 4 Ship Motions
Table 5 Manifold Details
Table 6 Berth Details, General
Table 7 Berth Details, Electrical Supply
Table 8 Berth Details, Electrical Earthing
Table 9 Berth Details, Safety
Table 10 Environmental Data
Table 11 Specific Requirements
Table 12 Envelope Details (Arms with ERS)
Table 13 Envelope Details (Arms without ERS)
Table 14 Central Control Requirements
Table 15 Pendant Control Requirements
Table 16 Location of Pendant Control
Table 17 Design Load Cases
Table 18 Tender Documentation (Two Sheets)
Table 19 Contract Documentation (Four Sheets)
Figures
Figures 1 Ship Details
Figures 2 Ship Motions
Figures 3 Berth Details
Figures 4 Reference Envelope (with ERS)
Figures 5 Reference Envelope (without ERS)
Figures 6 QC/DC Interlock System
Figures 7 Stripping System
Figures 8 Angle Detecting Proximity Switches
Figures 9 Development of Composite Envelope
Figures 10 Loading Arm Arrangement
Figures 11 Guidance to Clearance Check Points
Part III-Guidelines to Parts I and II
1 Introduction
2 Guidelines
Title: Design and Construction Specification for Marine Loading Arms 3rd Ed.
Number of Pages: 63
Product Code: 4400w008
ISBN: ISBN 13: 978-1-85609-071-1 (9781856090711), ISBN 10: 1-85609-071-X (185609071X)
Published Date: May 1999
Binding Format: Hardback
Weight: 0.50 kg
| 