This title replaces the three volume set comprising 'Guide to Purchasing Hawsers', 'Prototype Rope Testing' and 'Procedures for Quality Control and Inspection during the Production of Hawsers'. Published in 2001, it provides detailed specifications and guidelines for specification, purchasing and testing.
Author: OCIMF
Published: 2000
No Pages: 96
ISBN: 9781856092012
New Page 1 PART A GENERAL PRACTICES PROCEDURES
A-1 GENERAL PRACTICES
A-2 COMPLIANCE WITH OCIMF GUIDELINES FOR THE PURCHASING AND TESTING OF SPM HAWSERS
A-3 OCIMF COMPLIANCE CERTIFICATE
A-4 OTHER PRACTICES
FORM A OCIMF GUIDELINES FOR THE PURCHASING AND TESTING OF SPM HAWSERS COMPLIANCE CERTIFICATES
PART B PROCEDURES FOR SPECIFYING HAWSERS
B-1 GENERAL PROCEDURES
B-2 ROPES SIZE
B-3 ROPE PERFORMANCE
B-4 ROPE CONSTRUCTION
B-5 ROPE FIBRE MATERIAL
B-6 HAWSER ASSEMBLY
B-7 EYES AND THIMBLES
B-8 CHAFE PROTECTION
B-9 AUXILIARY GEAR
B-10 HAWSER LENGTH
B-11 MARKING OF HAWSERS
B-12 PACKING OF HAWSERS
FUGURE B-1 TERMINOLOGY AND DIMENSIONS OF EYES AND THIMBLES
FORM B PURCHASE SPECIFICATION FORM
PART C PROCEDURES FOR OFFERING HAWSER
C-1 GENERAL PROCEDURES
C-2 ROPE SIZE
C-3 ROPE PERFORMANCE
C-4 ROPE CONSTRUCTION
C-5 ROPE FIBRE MATERIAL
C-6 HAWSER ASSEMBLY
C-7 MARKING AND PACKING
FORM C OFFER OF HAWSER FORM
PART D PRODUCTION OF HAWSERS
D-1 GENERAL PROCEDURES
D-2 PRODUCT DESIGN DOCUMENTATION
D-3 QUALITY ASSURANCE PRACTICES AND REPORTING
D-4 ROPE FIBRE MATERIAL QUALITY
D-5 MATERIAL CONTROL
D-6 MATERIAL TESTING
D-7 ROPE PRODUCTION
D-8 SPLICE QUALITY
D-9 HAWSER ASSEMBLY, EYES, THIMBLES, CHAFE PROTECTION AND AUXILIARY GEAR
D-10 IDENTIFICATION AND LABELLING OF ROPE
D-11 PACKING
FIGURE D-1 DIMENSIONS AND MARKS OF DOUBLE-BRAID ROPE SPLICE
FIGURE D-2 DIMENSIONS AND MARKS ON EIGHT-STRAND AND LAID ROPE SPLICES
FORM D-1 YARN SPECIFICATION FORM
FORM D-2 ROPE QUALITY CONTROL CHECKLIST
PART E INSPECTION OF FINISHED HAWSERS
E-1 GENERAL PROCEDURES
E-2 ESTABLISHMENT OF INSPECTION CRITERIA
E-3 MANUFACTURING QUALITY
E-4 APPLICATION OF REFERENCE LOAD
E-5 INSPECTION OF SAMPLE ROPE SECTION
E-6 VERIFICATION OF ROPE STRENGTH
E-7 FIBRE MATERIAL IDENTIFICATION TESTING
E-8 INSPECTION AT REFERENCE LOAD
E-9 INSPECTION OF SPLICES
E-10 ROPE QUALITY
E-11 EYES, THIMBLES, CHAFE PROTECTION AND AUXILIARY GEAR
E-12 MARKINGS
E-13 PACKING
FORM E INSPECTION CHECKLIST AND REPORT
PART F PROTOTYPE ROPE TESTING
F-1 GENERAL PROCEDURES
F-2 INTENT OF PROTOTYPE TESTS
F-3 MONITORING BY INDEPENDENT INSPECTION
F-4 NUMBER OF TESTS
F-5 PROTOTYPE ROPE DESCRIPTION
F-6 TEST MACHINE
F-7 NEW DRY BREAKING STRENGTH TEST
F-8 NEW WET BREAKING STRENGTH TEST
F-9 BREAKING STRENGTH CALCULATIONS
F-10 CYCLIC LOAD TEST
F-11 ELONGATION MEASUREMENTS AND EXTENSION CALCULATIONS
F-12 REPORTING OF RESULTS
FORM F PROTOTYPE TEST CHECKLIST AND REPORT FORM
APPENDIX I DEFINITIONS AND TERMINOLOGY
APPENDIX II BASIC YARN TESTING
APPENDIX III EXAMPLE CALCULATIONS
APPENDIX IV NOTES ON CHANGES MADE IN THESE REVISED GUIDELINES FOR THE PURCHASING AND TESTING OF SPM HAWSERS
