1.0 INTRODUCTION
2.0 CLASSIFICATION SOCIETY RULES AND OTHER PUBLICATIONS
2.1 RULES
2.2 PUBLICATIONS
2.2.1 OCIMF
2.2.2 INTERNATIONAL CHAMBER OF SHIPPING (ICS)
2.2.3 ICS/OCIMF/IAPH
2.2.4 INTERNATIONAL MARITIME ORGANIZATION (IMO)
3.0 SINGLE POINT MOORINGS
3.1 TYPES OF SPM’s
3.2 CALM
3.3 SALM
4.0 OPERATIONAL PROCEDURES
4.1 PREPARATIONS FOR BERTHING
4.1.1 SPM PRE-BERTHING INSPECTION
4.1.2 SHIP BOARD MEASURES
4.2 MOORING
4.3 HOSE HANDLING
4.3.1 HOSE CONNECTION
4.3.2 HOSE DISCONNECTION
4.4 CARGO OPERATIONS
4.5 BALLAST OPERATIONS
4.6 UNMOORING
4.6.1 ASSISTED UNMOORING
4.6.2 UNASSISTED UNMOORING
4.7 SAFETY
4.8 POLLUTION
5.0 INSPECTION SCHEDULES AND PROCEDURES
5.1 INSPECTION SCHEDULES
5.1.1 PRE-BERTHING
5.1.2 WEEKLY
5.1.3 MONTHLY
5.1.4 HALF YEARLY
5.1.5 YEARLY
5.2 INSPECTION PROCEDURES FOR CALM SYSTEMS
5.2.1 SURFACE FLUID SWIVEL
5.2.2 SURFACE PIPING AND EXPANSION JOINTS
5.2.3 MAIN TURNTABLE BEARING
5.2.4 ANCHOR CHAINS AND ANCHORS OR ANCHOR PIPES
5.3 INSPECTION PROCEDURES FOR SALM SYSTEMS
5.3.1 SUBMARINE MAIN SWIVEL
5.3.2 ANCHOR LEG
6.0 MAINTENANCE AND MAJOR OVERHAUL
6.1 PLANNING
6.1.1 FACTORS INFLUENCING PLANNING
6.1.2 SAFETY PRECAUTIONS
6.2 INFORMATION APPLICABLE TO ALL SYSTEMS
6.2.1 REPLACEMENT OF SPM HOSES
6.2.2 REPLACEMENT OF MOORING HAWSER AND PICK-UP ROPE ASSEMBLIES
6.2.3 REPLACEMENT OF CHAFING CHAINS
6.3 INFORMATION PARTICULAR TO CALM SYSTEMS
6.3.1 REPLACEMENT OF MAIN TURNTABLE BEARING
6.3.2 SURFACE FLUID SWIVEL
6.3.3 TURNTABLE AND ANCILLARY EQUIPMENT
6.3.4 ANCHOR CHAINS
6.3.5 BUOY
6.3.6 BUOY TOWAGE
6.3.7 PLEM
6.4 INFORMATION PARTICULAR TO SALM SYSTEMS
6.4.1 BUOY BODY AND ANCHOR LEG
6.4.2 SUBMARINE MAIN SWIVEL AND HOSE ARM ASSEMBLY
6.4.3 BASE
6.4.4 PLEM
7.0 DIVING AND ROV SERVICES
7.1 FUNDAMENTAL PRINCIPLES
7.1.1 MINIMISE THE NEED FOR UNDERWATER INTERVENTION
7.1.2 MINIMISE EXPOSURE
7.1.3 CONTRACT ALL UNDERWATER WORK AS A SERVICE
7.1.4 SELECTION OF CONTRACTORS
7.1.5 INSPECTION AND AUDIT
7.1.6 CONTROLS
7.2 ENVIRONMENTAL SAFETY CONSIDERATIONS
7.2.1 SEA STATE, SWELL AND CURRENTS
7.2.2 SURFACE VISIBILITY
7.3 OPERATIONAL CONSIDERATIONS
7.3.1 OVER-SIDE LOADS AND WORKING
7.3.2 SURFACE VESSEL MOVEMENTS
7.3.3 DIVING ON INTERNALLY PRESSURISED PIPELINES
7.3.4 FISHING FROM SPM’s
7.4 MANNED DIVING SAFETY CONSIDERATIONS
7.4.1 PRESSURE RELATED ILLNESS
7.4.2 PROVISIONS FOR TREATMENT OF PRESSURE RELATED ILLNESSES
7.4.3 DIVER ENTERING AND LEAVING THE WATER
7.4.4 HEAD PROTECTION
7.4.5 USE OF CLOSED-CIRCUIT TELEVISION (CCTV)
7.4.6 HIGH PRESSURE WATER JETTING EQUIPMENT
7.5 USE OF HYPERBARIC DIVING SERVICES
7.5.1 SURFACE ORIENTED DIVING
7.5.2 SELF CONTAINED UNDER WATER BREATHING APPARATUS (SCUBA)
7.5.3 SURFACE SUPPLIED BREATHING APPARATUS (SSBA)
7.5.4 LIGHT-WEIGHT SSBA
7.5.5 USE OF NITROGEN/OXYGEN (NITROX) BREATHING GAS
7.5.6 DIVING TEAM SIZE
7.5.7 DIVER COMPETENCY
7.6 USE OF REMOTELY OPERATED VEHICLES
7.6.1 ROV CAPABILITIES
7.6.2 TYPES OF ROV
7.6.2.1 LOW COST ROV (LCROV)
7.6.2.2 OBSERVATION VEHICLES
7.6.2.3 WORK CLASS VEHICLES
8.0 SUPPORT FACILITIES
8.1 CRAFT FOR MARINE OPERATIONS
8.1.1 MOORING LAUNCHES
8.1.2 MAINTENANCE VESSELS
8.1.3 USE OF TUGS IN OPERATIONAL SUPPORT
8.2 SHORE MAINTENANCE FACILITIES
8.2.1 YARD AND STORAGE FACILITIES
8.2.2 FACILITIES FOR MAJOR HAUL
8.2.3 DOCK SPACE FOR SERVICE VESSELS
9.0 SPARE PARTS
9.1 SPARE PARTS APPLICABLE TO ALL SYSTEMS
9.2 SPARE PARTS APPLICABLE TO CALM SYSTEMS ONLY
9.3 SPARE PARTS APPLICABLE TO SALM SYSTEMS ONLY
10.0 RECORDS
10.1 RECORD CONTENT
10.2 TYPICAL AREAS TO BE COVERED BY THE RECORD SYSTEM
10.2.1 PRE AND POST MOORING CHECKS
10.2.2 OPERATING MOORING DATA
10.2.3 EQUIPMENT PERFORMANCE
10.2.4 OVERALL SPM PERFORMANCE
Title: Single Point Mooring Maintenance & Operations Guide 2nd Ed. (Downloadable Product)
Edition: Second Edition
Number of Pages: 80
Product Code: WS1152EA
ISBN: ISBN 13: 978-1-85609-072-8 (9781856090728), ISBN 10: 1-85609-072-8 (1856090728)
Published Date: November 1995
Binding Format: Paperback
| 