Tandem Mooring and Offloading Guidelines for Conventional Tankers at F(P)SO Facilities (eBook)

Published Date

December 2009


Also available in other formats:

Tandem Mooring and Offloading Guidelines for Conventional Tankers at F(P)SO Facilities (eBook)

$161.66
(Excludes any applicable taxes)

This book concerns conventional tankers engaged in tandem mooring and is the sister publication to ‘Recommendations for Equipment in the Bow Mooring of Ships at SPMs’. These guidelines address tandem mooring and cargo transfer operations of crude oil and other petroleum products between Floating (Production) Storage and Offloading facilities (F(P)SOs) and Conventional Tankers (CTs).

Be the first to review this product

These guidelines are primarily intended to familiarise Masters, ship operators, F(P)SO Operators and project development teams with the general principles and equipment involved in F(P)SO – CT operations. Transfer of crude oil and petroleum products between an F(P)SO and a tandem moored Conventional Tanker (CT) has become commonplace in the shipping industry as Operators increasingly develop offshore fields without recourse to shore based export terminals. Experience gained from existing operations has proven that cargo transfer operations in a tandem mooring configuration may be undertaken safely and reliably. In order to address site-specific aspects in particular locations, the recommendations contained within this publication may be supplemented by additional requirements from development project teams, individual ship owners (or ship managers) and individual F(P)SO Operators.

These Guidelines are intended to provide an understanding of the issues - including design, equipment, operations and environmental limitations in operation – contributing to a successful and safe tandem mooring and cargo transfer between an F(P)SO and a CT. Such issues should be taken into consideration by Project teams in the design / construction stage and by Operators at the execution stage, in order to provide an F(P)SO facility that maintains operational risk as low as reasonably practical, utilising risk reduction processes including, but not limited to, HAZOP, HAZID, Quantitative and Qualitative Risk Assessment and Failure Modes and Effect Analysis (FMEA), as appropriate.

This OCIMF document addresses the inter-relation between the F(P)SO and unmodified, Conventional Tankers operating in tandem mooring configuration. The guidance includes recommendations for mooring equipment, considers mooring loads and operations, motions of the F(P)SO and CT, station keeping, cargo transfer equipment and cargo transfer operations. Risk management of F(P)SO operations is addressed in detail within the: • OGP ‘Guideline for Managing Marine Risk Associated with F(P)SOs’ • UKOOA ‘Tandem Loading Guidelines’ • OCIMF ‘Offshore Safety Guidelines with Special Relevance to Harsh Weather Zones’. These documents primarily address dedicated Dynamic Positioning capable shuttle tanker operations. The relevant principles of Risk Management when operating with CTs in a tandem configuration are considered within this document.

 

 


Section 1

Glossary of Terms and Abbreviations

 

Section 2

Introduction

2.1 Scope

2.2 Purpose

2.3 Objectives

Section 3

Applicable Codes and Standards

3.1 Regulatory Compliance

3.2 Classification Society (CS) Rules

3.3 Statutory Requirements

3.4 Coastal State/Local Requirements

3.5 Process Equipment Industry Standards and Guides

 

Section 4

FPSO, FSO and Offloading Philosophy

4.1 Definition and Application

4.2 Operating Environments

4.3 F(P)SO Subsea Mooring Arrangements

4.4 F(P)SO Location Relative to Other Structures

4.5 Basis of Design and Offloading Philosophy Development

 

Section 5

F(P)SO Tandem Mooring Configuration and Equipment

5.1 Introduction

5.2 Mooring Equipment Design

5.3 Single and Dual Hawser Mooring Systems

5.4 Mooring Equipment

5.4.1 Chafe Chain Securing Point

5.4.2 Fairlead

5.4.3 Chafe Chain

5.4.4 Mooring Hawser

5.4.5 Weak Link

5.4.6 Hawser Handling and Storage

5.4.7 Hawser Retirement

 

Section 6

F(P)SO Cargo Offloading Configuration and Equipment

6.1 Configuration

6.2 Cargo Pumping System

6.3 Custody Transfer System

6.4 Manifold

6.5 Hose Flushing Arrangements

6.6 Cargo Hoses and Equipment

6.6.1 Cargo Hose Stowage in the Sea

6.6.2 Cargo Hose Stowage Reel

6.6.3 Cargo Hose Trough Storage

6.6.4 Cargo Hose Size and Length

6.7 Quick Release Couplings

6.7.1 Passive Couplings

6.7.2 Active Couplings

6.8 Hose End Fittings

6.9 Overpressure and Surge Protection

6.10 Cargo Containment

6.11 Lifting and Other Equipment

 

Section 7

Conventional Tanker Tandem Mooring and Loading Configuration and Equipment

7.1 Conventional Tankers

7.2 CT Bow Mooring Equipment

7.3 CT Cargo Manifold

7.3.1 Cargo Manifold Configuration

7.3.2 Cargo Hose Lifting Equipment

7.4 Position Keeping Equipment

7.4.1 Position Keeping

7.4.2 Towing Strongpoint and Bollards

7.4.3 Stern Mooring Winch

7.5 Personnel Transfer Facilities

7.6 Lighting

7.7 Surge Prevention and Overpressure Protection

7.8 CT Equipment Maintenance and Repair

 

Section 8

Mooring Forces and Relative Motions

8.1 Introduction

8.2 CALM Buoy and Conventional Tanker

8.3 F(P)SO and Conventional Tanker

8.4 Simulation, Motions and Forces

8.4.1 Condition of F(P)SO and CT

8.4.2 Hawsers

8.4.3 Tugs

8.4.4 Environmental Conditions

 

SECTION 9

Support Vessels, Manoeuvring and Station Keeping

9.1 Environmental Limitations for Tandem Mooring & Offloading

9.2 Requirements for Tugs and Support Vessels

9.2.1 General

9.2.2 Personnel Transfer

9.2.3 Mooring and Line Handling

9.2.4 Hose Handling

9.2.5 Tug Assistance

9.4 CT Approach to the F(P)SO

9.4.1 Approach to Turret Moored F(P)SO

9.4.2 Approach to Spread Moored F(P)SO

9.5 Approach Speed

9.6 Station Keeping and Limiting Sectors During Offtake

9.6.1 Operating Sectors

9.6.2 Monitoring and Alarm Systems

9.6.3 CT - F(P)SO Separation

9.6.4 Use of Thrusters on F(P)SOs

9.7 Navigational and Berthing Aids

9.7.1 Laser Range Finder

9.7.2 Telemetry and Doppler Systems

9.7.3 Handheld DGPS

 

SECTION 10

Tandem Offloading Operation

10.1 Organisation and Responsibilities

10.1.1 Management of Offloading Operations with CTs

10.1.2 Terminal Operator’s Responsibilities

10.1.3 Mooring Master and Assistant Mooring Master Requirements

10.1.4 Terminal Operations Procedures Manual

10.1.5 Terminal Regulations Manual

10.2 Pre-Arrival Preparations

10.3 Pre-Mooring Preparations

10.4 Mooring Operation

10.5 Pre-Transfer Conference

10.6 Cargo Hose Connection

10.7 Cargo Transfer

10.8 Cargo Handling

10.9 Communication Requirements for Tandem Offloading

10.10 Disconnect and Un-Mooring

10.11 Night Operations

10.12 Manning and Watch Standing Operations

 

SECTION 11

Risk Management

11.1 CT Tandem Offload

11.2 Hazards and Effects Management Process

11.3 CT Tandem Offloading Hazard Identification

11.4 Risk Assessment

11.5 Risk Control

11.6 Mitigated Risk Assessment

11.7 Recovery Measures

 

SECTION 12

References

Industry Guidelines

IMO Resolutions and Guidelines

Classification Rules

Mooring Systems

 

APPENDIX A

Offloading and Maintenance Philosophy

Title: Tandem Mooring and Offloading Guidelines for Conventional Tankers at F(P)SO Facilities (eBook)
Number of Volumes: 1
Edition: First
Number of Pages: 122
Product Code: WS1197EA
ISBN: ISBN 13: 978-1-905331-62-8 (9781905331628), ISBN 10: 1-905331-62-2 (1905331622)
Published Date: December 2009
Binding Format: Hardback
Book Height: 123 mm
Book Width: 213 mm
Book Spine: 10 mm

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Windows eBooks:

 

To access the eBook, you need to install our free Windows eBook Reader.

The application can be downloaded from:

www.seamanship.eu/download/freedownload.aspx?file=viewer.

 

Standalone eBooks are supplied with 1 licence + 1 backup and are not transferable between platforms.

 

Remote Desktop Services (Terminal Services) and virtual environments are not supported.

 

The Windows eBook Reader works with Windows XP or later OS (but not Windows RT).

See more details.

 

Cloud (online) eBooks:

 

The Cloud (online) eBooks use Microsoft Silverlight browser plugin to deliver the best possible reading experience with the ability to work in offline mode.

 

It is an annual subscription service (i.e. each eBook is purchased for 1 year of use).

Online licences are not transferrable to Windows or iPad (or vice-versa).

 

Silverlight is compatible with the major web browsers used on Windows and Mac OS X operating systems.

However it is not supported on Linux, Android, Windows RT and iPad devices and therefore the Cloud eBooks use an HTML site in these instances.

The HTML site is more restricted than the Silverlight version.

 

See https://www.microsoft.com/silverlight/what-is-silverlight and more details.

 

Note for Mac Users:

 

Mac users can read Windows eBooks with Boot Camp or using virtual machines such as Parallels Desktop, Virtual Box, ...

Alternatively, Cloud (online) eBooks are accessible on Mac, including the Silverlight plugin with offline mode.

 

Note for Linux Users:

 

Linux users can read Windows eBooks using a virtual PC.

Alternatively, the HTML version of the Cloud (online) eBooks is accessible.

 

Note for Tablet Users:

 

Tablets owners can use the HTML version of the Cloud (online) eBooks.

Share This!
  • Facebook
  • Twitter
  • Linkedin
  • and more...