Bulk Carriers: Handle with Care, 2nd Edition  (eBook)

Published Date

August 2020

Also available in other formats:

Bulk Carriers: Handle with Care, 2nd Edition (eBook)

(Excludes any applicable taxes)

This publication is a guide to the potential problems experienced when loading and discharging heavy and high-density cargoes and the resulting safety responsibilities of ships’ officers.

Be the first to review this product

This guide focuses on the potential physical damage that can incur on board bulk carriers due to the improper handling, loading and discharging of heavy and high-density cargoes.


It covers topics such as:


  • Hull structural failure
  • loads, hull structure and design
  • cargo distribution
  • planning, loading and control of cargo handling
  • ballast water management
  • safety considerations.



Chapter 1: Hull Structural Failure

Chapter 2: Potential Problems

Chapter 3: Loads, Hull Structure and Design

Chapter 4: Cargo Distribution

Chapter 5: Loading Guidance Information

Chapter 6: Planning and Control of Cargo Handling

Chapter 7: Ballast Water Management at Sea

Chapter: 8 IACS and Bulk Carrier Safety

In 2019, about 11,700 bulk carriers represent 35% of the world fleet gross tonnage. Heavy and high-density cargoes – mineral ores for example – make high physical demands on ships’ structures, especially in the cargo hold area.


Bulk carriers must be handled with care in port as well as at sea. Stevedores and ships’ officers responsible for cargo operations become key partners for ship safety, because the lives of seafarers may ultimately depend on careful cargo handling. Ship-to-shore planning, information and communication become vital.


Port and terminal authorities, together with owners and classification societies, therefore have a role to minimise risk in bulk carrier operations. IACS – whose members class over 90% of the world bulk carrier fleet – has investigated why bulk carriers have become vulnerable to structural problems, how their safety margins can be increased and how day-to-day operations can become safer for their seafarers.


IACS’ research shows that improper handling of heavy, high density cargo during cargo loading and discharge may cause excessive stress on ship structures and physical damage to holds and transverse bulkheads. Over time, this may reduce or threaten structural safety margins when the ship is at sea in heavy weather. Careful cargo handling helps maintain bulk carrier safety – bad practice lowers safety margins and increases the risk of damage.


This IACS booklet is part of a continuing series of publications dedicated to safer bulk carrier operations. Summarising the main problems in loading and discharging heavy and high-density cargo, it then considers technical factors from the viewpoints of design limitations and the ship safety responsibilities of the ships’ officers.


The main cargo handling risks are:


  • Poor ship-to-shore communications
  • Ignoring Loading Plans
  • Inadequate pre-planning of cargo operations
  • Improper load distribution between holds
  • Overloading by high-capacity systems
  • Physical damage during discharging.


Dedicated to safe ships and clean seas, IACS makes a unique contribution to maritime safety and regulation through technical support, compliance verification and research development. More than 90% of the world’s cargo carrying tonnage is covered by the classification design, construction and through-life compliance rules and standards set but the twelve Members Societies of IACS.

IACS is a not for profit membership organisation of classification societies that establish minimum technical standards and requirements that address maritime safety and environmental protection and ensures their consistent application. It carries out this responsibility through its panels, expert groups and project teams and provides a Quality System Certification Scheme (QSCS) that its Members comply with, as an assurance of professional integrity and maintenance of high professional standards. IACS is recognized as the principle technical advisor of IMO.


Title: Bulk Carriers: Handle with Care, 2nd Edition (eBook)
Product Code: WS1807EA
Published Date: August 2020
Book Height: 234 mm
Book Width: 156 mm
Author: IACS

Bought this product? Why not review it?

If you have a question about this product, please contact us directly.

Windows eBooks:


To access the eBook, you need to install our free Windows eBook Reader.

The application can be downloaded from:



Standalone eBooks are supplied with 1 licence + 1 backup and are not transferable between platforms.


Remote Desktop Services (Terminal Services) and virtual environments are not supported.


The Windows eBook Reader works with Windows XP or later OS (but not Windows RT).

See more details.


Cloud (online) eBooks:


The Cloud (online) eBooks use Microsoft Silverlight browser plugin to deliver the best possible reading experience with the ability to work in offline mode.


It is an annual subscription service (i.e. each eBook is purchased for 1 year of use).

Online licences are not transferrable to Windows or iPad (or vice-versa).


Silverlight is compatible with the major web browsers used on Windows and Mac OS X operating systems.

However it is not supported on Linux, Android, Windows RT and iPad devices and therefore the Cloud eBooks use an HTML site in these instances.

The HTML site is more restricted than the Silverlight version.


See https://www.microsoft.com/silverlight/what-is-silverlight and more details.


Note for Mac Users:


Mac users can read Windows eBooks with Boot Camp or using virtual machines such as Parallels Desktop, Virtual Box, ...

Alternatively, Cloud (online) eBooks are accessible on Mac, including the Silverlight plugin with offline mode.


Note for Linux Users:


Linux users can read Windows eBooks using a virtual PC.

Alternatively, the HTML version of the Cloud (online) eBooks is accessible.


Note for Tablet Users:


Tablets owners can use the HTML version of the Cloud (online) eBooks.